The BROUSSE heat pump and air conditioning cover has taken its inspiration from nature, with its fern, openwork design resulting in a cover that's easy to integrate and easy on the eye. Perfect for aesthetically hiding the technical unit of a heat pump or air conditioning in a garden or on the wall of a house.
The BROUSSE model completely covers the device to protect it from shocks and bad weather while maximizing the air circulation necessary for its proper functioning. BROUSSE adapts to all situations (wall, wall and floor, floor configuration) and to a majority of heat pump and air conditioning brands.
The BROUSSE heat pump cover or air conditioning cover is designed to aesthetically conceal and protect the device located outside the home.
Available in 2 sizes, BROUSSE is compatible with the majority of heat pump and air conditioning brands. The basic BROUSSE model is intended for wall mounting (without bottom plate, back plate or feet). Depending on the location of the heat pump or air conditioning, the BROUSSE model can be completed with:
> a bottom plate, provided when the heat pump is fixed to the wall at height in order to hide the installation from being seen from below. It thus allows a better aesthetic integration.
>a back plate, provided when the heat pump is free-standing on the ground and spaced away from the wall. The back plate allows the heat pump to be completely covered and gives a perfect 360° look. In this case, 4 additional feet are provided to raise the heat pump cover off the ground to enable connection pipes to pass under.
> feet (available individually), provided when the heat pump is to be free-standing (4 feet required) or when the heat pump is installed at the bottom of a wall (2 feet required). The feet allow the cover to be raised off the ground to enable connection pipes to pass under.
In addition to the 4 standard colours available, BROUSSE can be customized to order in the RAL shade of your choice for perfect integration of the heat pump or air conditioning (25% added value).
All OUTSTEEL heat pump and air conditioning covers have been tested by the CÉRIC Laboratory and have a two-year warranty.
Bottom plate (available in S and M)
Back-plate (available in S and M)
Single foot (standard size)
Galvanized steel design, powder coated.
Internal dimensions of the wall base (length x height x width/depth):
- Size S: 925 x 700 x 471 mm
- Size M: 1025 x 750 x 521 mm
Adjust the width/depth of the wall-hung model: Up to 100 mm
Depending on the size of the cover, select the corresponding bottom face or rear face (S or M). Legs are standard size.
Weight: From 15.8 kg to 25 kg
Available in 4 standard colours:
Other RAL colours: 25% increase in value
OUTSTEEL heat pump or air conditioning covers are quick to fit. Here are the assembly steps for the BROUSSE model:
The BROUSSE cover must be removed to carry out maintenance operations on the device as defined by the regulations.