Home > Domestic/Residential housing > Twin Wall Insulated Chimney System > Confort+ Warm air distribution for stoves and fireplace inserts

logout,

Click on the picture to zoom in

CONFORT+ WARM AIR DISTRIBUTION FOR STOVES AND FIREPLACE INSERTS

The warm air distribution system will recover the heat from an insert or a stove and dispatch it into the different rooms of the house, providing a better heat distribution.

The system operates under slight positive pressure (the air is regularly pushed). The fan extractor is installed in the attic and takes the air from the room where the appliance is set up. The air is pushed into the heat exchanger (twin wall for inserts and triple wall element including a 25 mm insulation for stoves) and warmed up by contact with the chimney liner. Finally the warm air is blown through ventilation duct and dispatched into the rooms through vents.

Cheminées Poujoulat can provide you with a complete, reliable system that provides operation that is controlled by the user and complete safety for the consumer. It can also improve the quality of the air.

Confort+ warm air distribution system is a Poujoulat innovation which is compatible with Therminox TI-ZI insulated chimneys (for stove installations) and Kitinox connecting pipe (for insert installations).

This range includes all the technical accessories needed to carry out the installation and maintenance of the system.


  • Quick and easy installation
  • secured installation
  • Fan housing
  • system equipped with silent blocks
  • Ten-year guarantee and CERIC Tested (test laboratory).

logo-CE.png  logo_CERIC.png

Confort+ Inserts

The Confort+ installation has to be made using a heat exchanger which is determined by the chimney's diameter :

 

Internal Ø 
of the heat exchanger (mm)

Ø 150 Ø 180 
Ø 200 Ø 250

Ø of the air 
inlet (mm)

Ø 125


Characteristics of the Extra fan motors

 

Poujoulat Extra fans are all equipped with silent blocks. They are freely ventilated on all sides. They are equipped with an electrical connection box and a thermostat for temperature adjustment for optimal comfort. The Extra 501 comes already equipped with an insulated filter box.

 

Engine Dimensions Output 230 V single-phase Ø for the connection Distribution Ø - number of outlets Maximum length Weight
Extra 250 330 x 315 x340 250 m²/h 50 W/1250 tr/min 125 2 - 3 - Ø 125 15 - 18 m 5,5
Extra 350 330 x 315 x340 350 m²/h 50 W/1250 tr/min 125 2 - 4 - Ø 125 15 - 18 m 5,5
Extra 500 345 x 310 x 385 500 m²/h 75 W/1225 tr/min 160 3 - 6 - Ø 125 20 - 25 m 6,0
Extra 501 485 x 400 x 385 500 m²/h 105 W/1045 tr/min 160 3 - 6 - Ø 125 20 - 25 m 6,5

Confort+ Stoves

 

Internal Ø 
of the heat exchanger (mm)

Ø 130
Ø 150 
Ø 180

Ø of the air 
inlet (mm)

Ø 125

 

 

 

 

 

 

  • Benefits
    • Quick and easy installation
    • secured installation
    • Fan housing
    • system equipped with silent blocks
    • Ten-year guarantee and CERIC Tested (test laboratory).

    logo-CE.png  logo_CERIC.png
  • Technical data

    Confort+ Inserts

    The Confort+ installation has to be made using a heat exchanger which is determined by the chimney's diameter :

     

    Internal Ø 
    of the heat exchanger (mm)

    Ø 150 Ø 180 
    Ø 200 Ø 250

    Ø of the air 
    inlet (mm)

    Ø 125


    Characteristics of the Extra fan motors

     

    Poujoulat Extra fans are all equipped with silent blocks. They are freely ventilated on all sides. They are equipped with an electrical connection box and a thermostat for temperature adjustment for optimal comfort. The Extra 501 comes already equipped with an insulated filter box.

     

    Engine Dimensions Output 230 V single-phase Ø for the connection Distribution Ø - number of outlets Maximum length Weight
    Extra 250 330 x 315 x340 250 m²/h 50 W/1250 tr/min 125 2 - 3 - Ø 125 15 - 18 m 5,5
    Extra 350 330 x 315 x340 350 m²/h 50 W/1250 tr/min 125 2 - 4 - Ø 125 15 - 18 m 5,5
    Extra 500 345 x 310 x 385 500 m²/h 75 W/1225 tr/min 160 3 - 6 - Ø 125 20 - 25 m 6,0
    Extra 501 485 x 400 x 385 500 m²/h 105 W/1045 tr/min 160 3 - 6 - Ø 125 20 - 25 m 6,5

    Confort+ Stoves

     

    Internal Ø 
    of the heat exchanger (mm)

    Ø 130
    Ø 150 
    Ø 180

    Ø of the air 
    inlet (mm)

    Ø 125

     

     

     

     

     

     

  • Installations instructions

Chimney systems for Industrial applications


Other Poujoulat sites :


How to install a chimney , a chimney stack ?
How to connect an appliance, and how to line a chimney ?

Cheminées Poujoulat is the specialist in production of metallic chimneys, chimney stacks , accessories for single houses, collective buildings, industrial and offices applications, for new buildings and renovations.
Cheminées Poujoulat offers a wide choice of solutions for flexible and rigid linings, connecting chimneys for all typs of appliances , inserts, wood stove, pellet stove, and boilers. Besides, Poujoulat can offer various solutions to improve the smoke evacuation : smoke extractor fans, warm air distribution, draft regulators, solution for maintening and sweeping the chimneys.