Home > Domestic/Residential housing > Concentric Chimney System for Gas Fires & Pellet Stoves > PGI gas

logout,

logout,

Click on the picture to zoom in

PGI gas

Concentric flue system for gas fired room-sealed appliances

 

The PGI Gas system is a 316L stainless steel concentric flue designed for gas fired room-sealed appliances. It brings the combustion air in and also evacuates the smoke. It can also be used as a conventional gas vent.

This innovative chimney system promotes lower fuel use and therefore lower cost of fuel and a much higher heat output.

A study run by the Environmental Agency for “More Energy” stated that when using air delivered by the PGI system the stove efficiency can be improved by 10 to 15% reducing the amount of fuel consumed.

All of the products offered by Cheminées Poujoulat have been rigorously tested in every configuration by the CERIC Laboratory to ensure they meet highest standards (Building Regulation Document J - Amendements to Approved Documents).

CE marking: 0071-CPD-0051/52
Designation: T450 N1 W Vm L50040 G50 (Dynamic application*) - T450 N1 W Vm L50040 G100 (Static application**)

PGI Gas is mainly suitable for new built market and can terminate vertically through the roof or horizontally through the wall. With our specially designed Renovation Kit you can easily connect this concentric chimney system to an existing chimney lined with our Tubinox Gas Flex liner.


  • Gain of efficiency
  • Adaptor solution to suit most of appliances outlets
  • High quality product
  • Quick and easy to install
  • Easily meets regulation requirements

 

Hetas  logo-CE.png  logo_CERIC.png

Vertical Installation

pgi



Horizontal Installation

pgi



Refurbishment Installation
pgi


Poduct overview

Note: Joint Seals not required. Locking Band included.

Inner Ø (in mm) 100 130 150
Outer Ø (in mm) 150 200 200

Wall material

Inner wall: AISI 316L stainless steel
Outer wall: AISI 316L stainless steel
Wall thickness Inner wall: 0.4 mm
Outer wall: 0.4 mm

Our Technical team will provide you a full thermal and structural design and produce working CAD drawings, all fully compliant with British and European Standards. For any technical enquiries, please e-mail: sales@poujoulat.co.uk

  • Benefits
    • Gain of efficiency
    • Adaptor solution to suit most of appliances outlets
    • High quality product
    • Quick and easy to install
    • Easily meets regulation requirements

     

    Hetas  logo-CE.png  logo_CERIC.png

  • Technical data

    Vertical Installation

    pgi



    Horizontal Installation

    pgi



    Refurbishment Installation
    pgi


    Poduct overview

    Note: Joint Seals not required. Locking Band included.

    Inner Ø (in mm) 100 130 150
    Outer Ø (in mm) 150 200 200

    Wall material

    Inner wall: AISI 316L stainless steel
    Outer wall: AISI 316L stainless steel
    Wall thickness Inner wall: 0.4 mm
    Outer wall: 0.4 mm
  • Installations instructions

    Our Technical team will provide you a full thermal and structural design and produce working CAD drawings, all fully compliant with British and European Standards. For any technical enquiries, please e-mail: sales@poujoulat.co.uk


Chimney systems for Industrial applications


Other Poujoulat sites :


How to install a chimney , a chimney stack ?
How to connect an appliance, and how to line a chimney ?

Cheminées Poujoulat is the specialist in production of metallic chimneys, chimney stacks , accessories for single houses, collective buildings, industrial and offices applications, for new buildings and renovations.
Cheminées Poujoulat offers a wide choice of solutions for flexible and rigid linings, connecting chimneys for all typs of appliances , inserts, wood stove, pellet stove, and boilers. Besides, Poujoulat can offer various solutions to improve the smoke evacuation : smoke extractor fans, warm air distribution, draft regulators, solution for maintening and sweeping the chimneys.