Home > Domestic/Residential housing > Concentric flue system for domestic boilers > Dualis Flexcondens

logout,

logout, logout,

Click on the picture to zoom in

Dualis Flexcondens

Concentric flue for condensing gas & oil boilers reusing an existing masonry chimney

The Dualis Flexcondens system provides «the ideal solution» when installing a domestic, new room sealed condensing gas or oil boiler and reusing the existing chimney stack by lining it with our plastic flexible flue liner. This will save hours of installation time.

All components up to terminal are manufactured using a high quality moulding process from polypropylene. This material has been tested & proven to be ideally suited to the products of combustion from all gas-fired and many oil-fired condensing boilers and accommodates flue gas temperatures up 120?C and positive pressures up to 5000 Pa. this range comes with a 10 year Axa backed guarantee.

All of the products offered by Cheminées Poujoulat have been rigorously tested in every configuration by the CERIC Laboratory to ensure they meet highest standards (Building Regulation Document J - Amendements to Approved Documents).

The flue liner kit has been designed to allow easy installation from the top and is supplied with the necessary spacers and support to centralise the liner within the chimney.

The two adaptors 60/100 and 80/125 will allow you to connect directly to the boiler manufacturers’ own supplied concentric or separate flue systems (refer to boiler manufacturer’s instructions)

CE marking: 0036-CPD-9165 001
Designation: T120 H1/P1 O W2 O20 IDL


  • Ideal solution for replacement boilers
  • No need to reposition the boiler
  • Resists to corrosive nature of acidic condensates
  • Quick and easy to install
  • Easily meets regulation requirements

 

logo-CE.png  logo_CERIC.png

Flexcondens Kits for C9 Applications (Ø80 & Ø110 only)


Cut Lengths Kits


KIT FL PPA
Option 1: 10 metre Kit
Includes 10 metres of plastic flex liner, 1 x 87? elbow, 1 x connector Flex/Rigid, 3 x location brackets and 1 x bottom support
Option 2: 7 metre Kit
Includes 7 metres of plastic flex liner, 1 x 87? elbow, 1 x connector Flex/Rigid, 2 x location brackets and 1 x bottom support


Boiler Kits


KPR PPA
Option 1: 60/100 boiler outlets to Ø80 mm plastic flex liner
Includes 1 x 250mm Lengths Ø80, 1 x Wall Plate with access door Ø100, 1 x reducer adaptor Ø80 to Ø60
Option 2: 80/125 boiler outlets to Ø80 mm plastic flex liner
Includes 1 x 250mm Lengths Ø80, 1 x Wall Plate with access door Ø100
Option 3: 80/125 boiler outlets to Ø110 mm plastic flex liner



C9 Application

(Evacuation of combustion gases via an existing masonry chimney)




B22P/B23P Application
 (Evacuation of combustion gases in pressure and air intake in the boiler room)




Product overview 

 


Technical features


Inner Ø (in mm)

80 110 125 160
Outer Ø (in mm) 90 125 140 175
Wall material Polypropylene
Max flue gas temperature 120°C

Technical support

 

Our Technical team will provide you a full thermal and structural design and produce working CAD drawings, all fully compliant with British and European Standards. For any technical enquiries, please e-mail: sales@poujoulat.co.uk

  • Benefits
    • Ideal solution for replacement boilers
    • No need to reposition the boiler
    • Resists to corrosive nature of acidic condensates
    • Quick and easy to install
    • Easily meets regulation requirements

     

    logo-CE.png  logo_CERIC.png

  • Technical data

    Flexcondens Kits for C9 Applications (Ø80 & Ø110 only)


    Cut Lengths Kits


    KIT FL PPA
    Option 1: 10 metre Kit
    Includes 10 metres of plastic flex liner, 1 x 87? elbow, 1 x connector Flex/Rigid, 3 x location brackets and 1 x bottom support
    Option 2: 7 metre Kit
    Includes 7 metres of plastic flex liner, 1 x 87? elbow, 1 x connector Flex/Rigid, 2 x location brackets and 1 x bottom support


    Boiler Kits


    KPR PPA
    Option 1: 60/100 boiler outlets to Ø80 mm plastic flex liner
    Includes 1 x 250mm Lengths Ø80, 1 x Wall Plate with access door Ø100, 1 x reducer adaptor Ø80 to Ø60
    Option 2: 80/125 boiler outlets to Ø80 mm plastic flex liner
    Includes 1 x 250mm Lengths Ø80, 1 x Wall Plate with access door Ø100
    Option 3: 80/125 boiler outlets to Ø110 mm plastic flex liner



    C9 Application

    (Evacuation of combustion gases via an existing masonry chimney)




    B22P/B23P Application
     (Evacuation of combustion gases in pressure and air intake in the boiler room)




    Product overview 

     


    Technical features


    Inner Ø (in mm)

    80 110 125 160
    Outer Ø (in mm) 90 125 140 175
    Wall material Polypropylene
    Max flue gas temperature 120°C
  • Installations instructions

    Technical support

     

    Our Technical team will provide you a full thermal and structural design and produce working CAD drawings, all fully compliant with British and European Standards. For any technical enquiries, please e-mail: sales@poujoulat.co.uk


Chimney systems for Industrial applications


Other Poujoulat sites :


How to install a chimney , a chimney stack ?
How to connect an appliance, and how to line a chimney ?

Cheminées Poujoulat is the specialist in production of metallic chimneys, chimney stacks , accessories for single houses, collective buildings, industrial and offices applications, for new buildings and renovations.
Cheminées Poujoulat offers a wide choice of solutions for flexible and rigid linings, connecting chimneys for all typs of appliances , inserts, wood stove, pellet stove, and boilers. Besides, Poujoulat can offer various solutions to improve the smoke evacuation : smoke extractor fans, warm air distribution, draft regulators, solution for maintening and sweeping the chimneys.